27
HMD8 DSP/
USER’S MANUAL
•
DISTANCES
The image below shows the output channels panel and the functions relating to the speakers position.
2
1
4
3
Loudspeaker position panel:
open the output channel position panel.
Loudspeaker distance:
shows the distance of the speaker from the center of the listening area.
Automatic delay calculation command:
this function automatically sets the delays of all the output channels of the
current zone and for the current source, starting from the position of the speakers. The delay correction in
samples is reset.
Help:
to open the user guide.
1
2
3
4
Remark:
the loudspeaker position panel should be set for each zone that contains output channels.
The unit of measurement of the distance (centimeters or inches) can be set inside the global settings panel on the top
right of the configuration software.
Remark:
once the automatic delay calculation has been carried out, it is possible to make a fine adjustment by
applying a delay correction to every single output channel through the delay panel.
Remark:
it is advisable to use the automatic delay calculation command on all the zones that contain the output
channels and for all the available sources of the device, unless you want to manually enter the delay value in the
delay panel.
6
