Operating Instruction
95990021
Operating Instruction
95990021
43
www.herthundbuss.com 42
EN
EN
E5# OBD II module write error, missing
data Read in all sensors with the tool
before connecting via the OBD II module.
E6# OBD II module initialisation
(teaching-in process) failed.
E7# ID format different on manual modi-
fication Modification of the tyre position
is only possible within the same vehicle.
E8# ID format different on copying
sensor ID Copying of the sensor ID is
only possible within the same vehicle.
Please make sure you have selected the
correct vehicle in the tool.
1.4 Commissioning
1.4.1 Device setup and control panel
Dust protection cap/
Sensor slot
Battery indicator:
battery low (red)
Charging indicator:
battery (green)
Impact protection
sleeve
LCD display
Micro USB +
RJ-22 (4P4C)
Tread depth gauge
Radio antenna
Connection:
D-Sub (DA-15)
connection cable
to OBD II socket
2. Functions
2.1 Starting the AirGuard
Press the on/off button for at least three
seconds respectively until the device is
switched on/off.
The device will display the Herth+Buss
logo whilst turning on.
When the device is started up, you
will see the main menu. Pressing the
“Home” button allows you to return to
the main menu at any time.
You can see the battery level of the
device at the top left.
While switching off, the device shows
the “POWERING OFF” message.
You can see the AirGuard version
number under device information.
(Page 64)
2.2 Manufacturer selection
Use the arrow buttons to navigate.
Select “Manufacturer selection”.
Press “OK” to confirm.
Now select the desired vehicle (Kfz).
Select the vehicle manufacturer.
Press “OK” to confirm.
Select the model.
Press “OK” to confirm.
Select the year of manufacture.
Press “OK” to confirm.
LED light/camera (rear)
Arrow keys
Back
Home
On/Off
