19
21/03/2019 Rev.2 (04/12/2019)
Step 6 :
Removing the backrest from the trolley
Step 7 :
Removing the trolley from the basis.
Unlock the backrest by rotating the wing bolts (1) which are
maintaining it on the trolley by rotating them clockwise, see
photos A et B. Align both arrows, see photo B'.
Press on the pushbutton (1), see photo A, and rotate the trolley to extract it from the guide tracks.
Remove the trolley out of range not to be disturbed while mounting the bed.
To mount the trolley, emboiter le côté droit puis le côté équipé du bouton poussoir.
1
2
3
B
A
1
1
1
Place the backrest on the floor, it
stands up on its own, see photo C.
After that, remain the basis and the trolley, see photo D.
A
B
D
C
Base without trolley, see photo C
C
Special use of the trolley, see photo B
The holes (1+2) makes the transport tray works as a bed/wall protector.
The third hole (3) enables the transport tray to be completely removed
under the bed.
B'
Distributør i Norge:
Gymo AS - www.gymo.no
(+47) 4000 3522 - [email protected]
