Hensel-Visit Expert D 1000, Руководство пользователя

Страница: 40 / 76

Mounting and removing components of
the device
40

Guide the safety rope (1) through a suitable and stable opening in the
stay arm as seen in the following figure.

Open the screw hook (4).

Insert the rope thimble (3) into the screw hook (4).

Insert the screw hook into the hanger clip (2).

Close the screw hook (4) tightly again.
When working with a boom or telescopic boom, you can just wrap the
safety rope several times around the tube of the boom or telescopic
boom and fasten it to the device as described above.
To remove the device, proceed as follows:

Open the screw hook (4).

Remove the screw hook (4) from the hanger clip (2).

Remove the rope thimble (3) from the screw hook (4).

Remove the safety rope (1) from the opening of the pantograph.

Loosen the additional locking screw.

Hold the device firmly with one hand.

Loosen the knurled screw.

Remove the device from the pantograph.