Hensel-Visit Expert D 1000, Руководство пользователя

Страница: 45 / 76

Operating the device
45
Activating and deactivating the “Flash Check” function
The device flash is monitored using the “Flash Check” function. When this
function is activated, the model light goes out after the flash procedure is
performed and does not light up until the flash is ready to operate again.
To activate the “Flash Check” function, proceed as follows:

Press the FC button.
The LED display above the FC button lights up green.
To deactivate the “Flash Check” function, proceed as follows:

Press the FC button again.
The LED display above the FC button goes out.
Activating and deactivating the “Audio” function
With the “Audio” function, flash readiness after charging or after a
reduction of the flash energy is indicated by an acoustic tone. To activate
the “Audio” function, proceed as follows:

Press the AUDIO button.
The LED display above the AUDIO button lights up green.
To deactivate the “Audio” function, proceed as follows:

Press the AUDIO button again.
The LED display above the AUDIO button goes out.