Henry Schein HS-Vet, Инструкция по эксплуатации

Страница: 11 / 279

10
information about recycling of this product or battery,
please contact your local Civic Office, or the shop where
you purchased the product.
3 The sensor unconnected icon and associated alarm
indicate the sensor has disconnected or wire fault. So
check the sensor connection and, if necessary, replace
the sensor, extension cables or both.
4 When adjusting any menu parameters, the oximeter
does not display SpO2 or PR, but it is still recording.
5 The performance of the oximeter may degrade if the
followings occur:
— Operation or storage temperature beyond the
manufacturer’s specified range;
— Mechanical shock (for example, it drops down from
the table).
6 For the comfort of the animal and to avoid damaging the
sensor, do not pull on the cable when removing the
sensor and clip from the sensor site.
7 To remove the sensor and clip from the animal, press
the clip open and remove.
8 Federal law restricts this device to sale by or on the
order of a veterinarian.
1.3 Notes
NOTE:
Notes are identified by the symbol shown above. Notes
contain important information that may be overlooked or
missed.
NOTE:
1 This device has been tested and found to comply with
the limits for medical device in IEC/EN60601-1-2
(International standard for EMC testing of Medical
Electrical Equipment, second edition). These limits are