6.
Label Number
The label that was printed for this package.
7.
Number of Cycles
The number of cycles run from the start time.
6.2.2 Starting the Machine
1.
Plug in the machine.
2.
Press the on/off button on the control panel to enable the operation.
6.2.3 Starting the Packaging Cycle
The machine must be started in accordance with Starting the Machine on page 38 before
starting a packaging cycle.
1.
Select the desired program.
Press the
►
button or the
▼
button.
2.
Put the product/products in place.
a.
Put the product/products in the vacuum bag.
b.
Place the vacuum bag in/on the vacuum chamber. Make sure the opening(s) is/are
correctly placed with regard to the seal position(s).
3.
Close the lid.
The packaging cycle will start.
6.2.4 Proceeding to the Next Step in the Cycle
For some products, it may be necessary to proceed to the next step in the packaging cycle before
the vacuum time or the vacuum level has been reached.
1.
Proceed to the next step in the cycle.
Press the
►
button.
The next step will be started.
6.2.5 Changing the Program Settings
Users can view the machine programmes and activate the functions in the navigation mode. This is
the mode that appears immediately after start-up.
Figure 10: Screen shot of the navigation mode and the operating buttons of the ACS
Operation 38