6.2.1.3.2 Exporting Data Log
The memory can store up to 100 entries. If the memory is full, you will receive a message. The
data log will first need to be exported before you can continue your work. You can export the data
at any time. Only the owner can export data. After exporting the data, the memory will be erased
automatically.
Avoid undesired delay during production by downloading the data log at fixed times.
1.
Log in using the owner code (1324).
You will be granted access to the relevant settings.
2.
Within the menu, go to Import/Export and select Export.
3.
Insert a USB stick into the USB port.
Various options will appear on the screen.
4.
Select Export Data log.
The log will be downloaded to the USB stick and the memory is erased.
Figure 9: Example of an Exported Data Log
1.
User Initials
The initials of the person who logged in. If no initials were entered in the settings, nothing will
be shown here. See the example in the bottom line of Figure 9: Example of an Exported Data
Log on page 37.
2.
Start Time and Date
Start time and date of the production.
3.
Program
The program number used.
4.
Vacuum
The maximum achieved vacuum of the package.
5.
Seal Time
The seal time used.
Operation 37