6.1.6.10 Seal
This is the time that the sealing wire and/or the cut-off wire are heated. The longer the time, the
more heat is transferred to the bag.
As an option, the machine can be equipped with a Seal 1-2 option. This means the seal wire is
activated separately from the cut-off wire. This way the cut-off wire can be activated a bit longer, to
cut through thicker bags.
To set the Seal option, follow the steps below:
1.
Press the PROG 0 – 9 button to select the program you wish to change.
2.
Press the REPROG button to select the programming mode.
The function display will start flashing.
3.
Use the Cursor key to scroll to the parameter Seal.
The LED in front of the selected function will light up.
4.
Press the – / STOP button and the + / VACUUM STOP button to adjust the value.
5.
Press the REPROG button to activate the new parameter.
The function display will stop flashing.
To change the Cut-off time:
6.
Press the Cursor key again. The LED in front of Seal will still be lit. Repeat steps 4 and 5.
6.1.7 Example programmes
The vacuum packaging machine is equipped with sample programmes with pre-set parameters. It
is possible to optimise a program for your products by modifying the parameters.
Prog
Vacuum
Seal
Soft-air
Type of product
1.
99%
OFF
2.2 s
3 s
Solid products
2.
97%
N/A
2.2 s
OFF
Liquids/liquid-con-
taining products
3.
99%
OFF
2.2 s
8 s
Fragile/sharp products
4.
99%
4 s
2.2 s
3 s
Product that may con-
tain entrapped air
Set as sensor-controlled
Prog no.
1
2
3
4
5
6
7
8
9
10
Vacuum
99%
97%
99%
99%
80%
90%
50%
90%
60%
99%
OFF
OFF
4 s
15
Gas
OFF
OFF
OFF
60%
50%
80%
OFF
80%
30%
OFF
Seal
2.2 s
2.2 s
2.2 s
2.2 s
2.5 s
2.5 s
2.5 s
2.5 s
2.5 s
2.5 s
Seal 2
3.5 s
3.5 s
3.5 s
3.5 s
3.5 s
3.5 s
3.5 s
3.5 s
3.5 s
3.5 s
Soft-air
3 s
OFF
8 s
3 s
OFF
OFF
2 s
OFF
OFF
3 s
Operation 29