Hengx CYD-C8+-15K, Руководство пользователя

Страница: 6 / 22

5
setting. Make the blinking spot shift leftwards when inputting the figures.
10)
PRINT/LO
key Press the key to print when printing manually is selected. Set the LO
value. Enable the blinking figure decrease one when inputting the figures.
11)
TARE/
f
key Input the weight of the object on the weighing pan as a Tare value ; Inputs
the indicated value entered via the numeric keys as a pre-set Tare value ; cancel tare
action.
Display
rightwards
the first 10 records in detail. Make the blinking spot shift
rightwards when inputting the figures.
4-3 Power Supply
Power supply
Please verify the local power source before plugging into the power outlet, and use the
individual power socket and original adaptor.
Alternative power supply
1)
（
9V/400mA
）
adaptor
2) (6V/4A) internal rechargeable battery
Power Consumption
About 300mW (without backlight)
About 380 mW (with backlight)
Low battery warning
When “ ” appears in the upper left corner of the weight window, the battery power requires
recharging. The charge lamp turns green from red when the recharging is completed (which
takes about 8 hours). Disconnect the scale from power supply when it is fully charged. A full
charged battery can operate the scale for approximately 65 hrs with backlight, 80hrs without
backlight.
Note: Battery is to be replaced only by an authorized service dealer .Risk of explosion can
occur if replaced with the wrong type or connected improperly
5. Setting Mode
5-1 Function Setting
1) Press
G N/SET
key while powering on
Or long press
G N/SET
key in the weighing mode to enter parameter setting.
2) Press key
e
/MR
or TARE/
f
to circle the parameters
3) Press key
G N/SET
to enter the selected parameter.
4) Press key
e
/MR
or TARE/
f
to circle the items of present parameter.