Evolution™ Electric Bed LI156Ex
42
QD1532A(2)
USER MANUAL
CL
E
ANI
NG
6. CLEANING
The bed has been designed for easy cleaning and optimised disinfecting.
6.1
SAFETY RECOMMENDATIONS
- Ensure that the bed will not move
- Lock out all electrical functions
- Disconnect the bed from the mains power supply
- Ensure that all connections are firmly in place (hand pendant control, lock-
out controls, power drives connected to main power supply unit)
-
Never pour water on the bed, use a high-pressure hose, or wash in a
tunnel wash
-
Never use water at a temperature of over 60°C
- Avoid getting excess water on connecting plugs, the control lock-out
switches and on the mattress
- Refer to the manufacturer instructions for the cleaning product
- Thoroughly dry the bed before reusing it.
Failure to implement one or more of these recommendations may lead to
damage or deterioration, preventing use of the bed and rendering the
warranty void.
6.2 GENERAL ADVICE
NOTE 1:
Staining disinfectant products must be removed rapidly to avoid
permanent staining.
NOTE 2:
A list of recommended cleaning products for all types of
cleaning requirements will be supplied on request along with a
special maintenance advice leaflet.
DO NOT EXCEED RECOMMENDED DOSES: read diluting instructions
carefully (see detergent and disinfectant manufacturer’s instructions leaflets).
Jack plugs may be cleaned with running water (normal tap pressure) but not
hosed down.
Avoid excessive temperature differences between the water and the jacks.
Bed and accessories: see recommendations under 6.3
Plastic parts: see recommendations under 6.3
The hard surfaces can be washed with running hot water away from the bad
after being removed.
Endboards, siderails: see recommendations under 6.3
