Eradicator Gen II O
3
Manual Supplement
Install & Service Guide
6
Copyright ©2021 Aqua Systems, All Rights Reserved • 404 Moravian Valley Road, Waunakee, WI 53597
Gen II O
3
with Ozone
Installation
To mount the EOG II to
the control valve, slide
the mounting ring over
the injector cap, then
attach the lower clip
to the inlet part of the
valve body. Then snug
the clamp screw to
secure the EOG II to
the control valve.
Power Supply
Transformer Jack
Insert Power
Supply Plug Here
Install the Vertical
Adapter Elbow with
check valve to the
INLET
port of the
bypass.
Then attach the
Bypass to the Control
Valve.
Power Supply Plug
Lower Clip
Clamp Set
Screw
Mounting
Clamp
Inlet Check
Valve
Attach O
3
outlet tube
see page 7, figures a & b
Make sure the Vertical
Adapter w/check valve is
installed facing down.
Note:
