Heliocentris Energy Manager 2.0, Инструкция по эксплуатации

Страница: 54 / 101

Operating
Menu item Display Description I/C
test User request for test.
Selected unit will switch to Offline
operational state. I
Change
OpMode
1 of the
commands:
Commands to be entered by user.
no command No command is in the queue. I+C
go online Request for online operation
mode. Selected unit will switch to
online operation mode.
Can only be executed in offline
operation mode. C
go offline Request for offline operation
mode. Selected unit will switch to
offline operation.
Can be executed in any operation
mode.
C
go testmod Request for test operation mode.
Selected unit will switch to test
operation mode. Can only be
executed from offline mode.
C
cancel
command Cancels command in queue C
Temp x.x °C Temperature at outlet of Aircon
unit
I
Current x.x A Current consumption of Aircon
unit (if sensor is installed)
I
Prio xxxx Priority value of the Aircon unit I
Op-Time x.xx h Operating hours of Aircon unit I
Reset counter* Resets operating counters C*
Error List Number in
hexadecimal
format All active events are displayed one
after another with their number
and a short text, which can be
reviewed I+C
Legend:
*
Item is only displayed if the access level is service
I/C Information/Command
Table 5-7 Aircon submenu
5.1.8 Free Cooling Unit (FCU) Submenu
Menu item Display Description I/C
OpState 1 of the modes: Operational state of the free
cooling unit. The mode is also
displayed in the main menu if
no error has occurred.
init Software module is initializing. I
active FCU is active. I
54 Energy Manager 2.0 - Instruction Manual