Heliocentris Energy Manager 2.0, Инструкция по эксплуатации

Страница: 80 / 101

Maintenance and Service
8.2.2 How to Shut Down Energy Manager
The operating system and software are shut down with the function
Poweroff . The shutdown must be completed before disconnecting the
system.
Shut down the Energy Manger as follows:
1.
In the main menu, select Service.
2. Confirm with OK .
3. Select Poweroff .
TIP
There is no security query. After confirming
OK
, the function will
immediately be performed.
4. Confirm with OK , if you are sure that you want to shut down the
system.

The Energy Manager is shut down without further prompts.
5. Remove the power cord to prevent an automatic restart.
8.2.3 How to Perform a Forced Restart
Select software processes are rebooted with the function Forcedrestart .
The function is performed automatically after new units have been
implemented into the system. A system message informs you that a forced
restart must be performed manually.
Proceed as follows:
1.
Log in with service password. See How to Log In as Service User on
page 34.
2. In the main menu, select Service .
3. Confirm with OK.
4. Select Forcedrestart .
NOTICE! There is no security query. After confirming with OK , the
function will immediately be performed.
5. Confirm with
OK
.

The Energy Manager is restarted without further prompts.
8.2.4 How to Apply the Reset Button
In case the LCD functions are not available, the mainboard reset button
(1) allows one to:
•
Restart the system
•
Switch-off the system
A main board reset may only be executed by Heliocentris personnel or an
authorized partner.
A mainboard reset does not reset error messages or reset the system.
80 Energy Manager 2.0 - Instruction Manual