Operating
5.3
How to Update the EM Software
The Energy Manager is generally delivered with the most recent version of
the software already installed. Software updates are performed by
transferring the stored and delivered software on a USB flash drive to the
Energy Manager.
New software version on USB flash drive
Perform a software update as follows:
1.
Plug the USB flash drive into the USB port of the Energy Manager.
After a few seconds the status of the update procedure is displayed
on the LCD.
NOTICE
Property damage due to data loss!
The copying process takes several minutes and continues untilit is
complete.
Do not remove the USB flash drive during the copy process.
You are informed by a message or by the main menu coming back
up that the process has finished.
2.
Remove the USB flash drive.
5.4
How to Reset Counters and Statistics Data
After replacing a hardware component of the system like Genset or
Aircon, the counters and statistics data for this component must be reset
by service.
TIP
This function is reserved for users with service rights.
Reset counters and statistics data as follows:
1.
In the
main menu
, select
Login.
2.
Enter the appropriate password.
3.
In the
main menu
, select the respective module.
4.
Confirm with
OK
.
5.
Select
Reset Counters.
6.
Confirm with
OK
.
The counter values are reset to 0 and begins counting from 0
again.
Energy Manager 2.0 - Instruction Manual
71
Содержание Energy Manager 2.0
