Heliocentris Energy Manager 2.0, Инструкция по эксплуатации

Страница: 53 / 101

Operating
Menu item Display Description I/C
Load One of the
commands:
Command to be entered by a
user.
Disconnect load Switches load relay off manually I+C
Connect load Switches load relay on manually I+C
Voltage x.xx V Load voltage [V] I
Current x.x A Load current [A] I
Power x.x kW Load power [kW] I
P-Meter xxxx kWh Load energy [kWh] I
Reset Counter* Resets operating counters C*
Error List Number in
hexadecimal
format
All active events are displayed one
after another with their number
and a short text, which can be
reviewed.
I+C
Legend:
* Item is only displayed if the access level is service
I/C Information/Command
Table 5-6 Load submenu
5.1.7 Aircon Submenu
Menu item Display Description I/C
OpState 1 of the states: Operational state of the air
conditioning unit. The state is also
displayed in the main menu if no
error has occurred.
init Software moduleis initializing. I
active Aircon module is active.
offline Aircon module is offline and will
not be started by the EM control
software.
I
standby Aircon is available, but is not used
in the moment.
I
error Aircon module is in error status. I
OpMode 1 of the modes: Operation mode that indicates the
system answer to a user command
(CMD).
init Software module is initializing. I
run User request for Online.
Selected unit will switch to one of
the following operational states:
-
Standby
-
Active
-
Error
I
offline User request for Offline.
Selected unit will switch to Offline
operational state. I
Energy Manager 2.0 - Instruction Manual 53