Heinner HBM-690W, Руководство пользователя

Страница: 5 / 76

www.heinner.com 600W, 50Hz, 230V
3
V. CONTROL PANEL BUTTONS AND FUNCTIONS
After power-up
As soon as the bread maker is plugged into power supply, a beep will be heard and
“1 3:00” will be displayed. But the colon between the “3” and “00” don’t flash
constantly. And “1” is the default program. The arrows point to “2.0LB” and
“MEDIUM” as they are default settings.
Start/stop
The button is used for starting and stopping the selected baking program.
To start a program, press the START/STOP button once. A short beep will be heard,
the indicator will light up, and the two dots in the time display begin to flash and
the program starts. Any other button is inactivated except the START/STOP button
after a program has begun.
To stop the program, press the START/STOP button for approx. 2 seconds, then a
beep will be heard, it means that the program has been switched off. This feature
will help to prevent any unintentional disruption to the operation of program.
Menu
The MENU button is used to set different programs. Each time it is pressed
(accompanied by a short beep) the program will vary. Press the button
discontinuously, the 12 menus will be cycled to show on the LCD display. Select your
desired program. The functions of 12 menus will be explained below.
Color
With the button you can select light, medium or dark color for the crust.
Loaf size
Select the gross weight (1.5LB, 2.0LB). Press the LOAF SIZE button to choose your
desired gross weight, see the mark beneath it for reference.
This button is only applicable for the following program: BASIC, FRENCH, WHOLE
WHEAT, SWEET and SANDWICH.
DELAY (“
or ”)
If you want the appliance do not start working immediately you can use this button
to set the delay time.
You must decide how long it will be before your bread is ready by pressing the
“
or ”. Please note the delay time should include the baking time of program.
That is, at the completion of delay time, there is hot bread can be serviced.