Hefter TF MEGA-A, Инструкция по эксплуатации, Страница: 34 / 71

3-4
Chapter3 Advanced Operation
10
Press the key again for test folding
and check the finish of test folding.
Check for folding misalignment using the
second test folded sample.
If folding misalignments occur, refer to
Chapter 3 "ADVANCED OPERATION"“5.
Correcting Folding Misalignment”
( p.3-20).
11
After completing adjustments, set the
count mode either to the add count or
to the subtract count, then press the
key to start folding operations.
Refer to Chapter2 "Basic Operation"
“1.Standard Folding of Standard Paper” "1-3.
Operation Procedures ( p.2-2).
Stacker roller
Lever
Belt
Stacker lever
12
After the operations have completed,
move the left and right levers attached
to the stacker lever in the direction of
the arrow.
If the stacker rollers are left lifted up,
problems will occur when the normal
paper size is used.
Once a paper size or folding mode is changed
or the power is turned off, the stacker rollers
will return to the automatically set position.
1-3. Double Folding B6 Thin Paper (EU)/Small Thin Paper (North America)
Paper jam may occur when folding B6 size fine quality paper of between 64 g/m
2
and 81.4 g/m
2
(EU)/folding
5.00 (W) x 7.00 (L) inch size fine quality paper of 22 lb or thinner (North America) into four. Using the supplied
guide plate unit will prevent paper jam.
Guide plate unit
1
Remove the guide plate unit stored
inside the top cover.