Hefter TF MEGA-A, Инструкция по эксплуатации, Страница: 19 / 71

1-9
Chapter1 Before Operation
No. Name Function
[1] First folding plate Guide plate for deciding a paper folding position. First folding is
made using this plate.
[2] Control panel Used when operating the machine. Error messages are also
displayed on the LCD display.
[3] Second folding plate Paper folded at the first folding plate is sent to the second folding
plate. Second folding is made using this plate. This plate is not
used when folding paper into two.
[4] Power switch Turns on and off the power.
[5] Paper receiving tray Receives folded paper ejected out.
[6] Paper receiving stopper Stops paper ejected out from the machine.
[7] Stacker rollers Ejects folded paper from the machine.
[8] Paper set lever When lowered, the paper feed tray is raised.
[9] Support paper feed plate Supports paper stacked on the paper feed tray.
[10] Paper feed tray Used to stack paper to be folded.
[11] Side guide Holds paper stacked on the paper feed tray.
[12] Top cover Prevents the user from touching the moving parts.
[13] Jam correction knob Removes paper jammed around the rubber roll by turning the
knob.
[14] Paper feed ring Feeds paper into the machine.
[15] Rubber roll Sends paper to the first folding plate.
[16] Separating pressure adjustment dial Adjusts the paper separating pressure.
[17] Paper feed pressure adjustment knob Adjusts paper feed pressure.
[18] Slant correction paper feed knob Corrects misalignment along sides of paper.