Hefter TF MEGA-A Скачать руководство пользователя страница 13

Страница: 13 / 71

1-3

Chapter1 Before Operation

2-2. Removing the Press Release Lever

The press release levers are attached to the unit at shipment to prevent the rubber roll from becoming

distorted. Be sure to remove them when setting up the machine.
The two types of press levers are attached to either side of the rubber roll.

Press release lever (A)

Operator’s side

Rubber roll

Press release lever (B)

Press release lever (A)

Press release lever (B)

Non-operator’s side

Rubber roll

The machine will be damaged if it is used without removing the lever.

To remove the press release lever (A) on the non-operator’s side, push it inwards and

pull it out.

Press release lever (A)

To remove the press release lever (A) on the operator’s side, push it inwards and pull it

out.

To remove the press release lever (B) on the non-operator’s side, push it inwards and

pull it out.

Press release lever (B)

To remove the press release lever (B) on the operator’s side, push it inwards and pull it

out.

Содержание TF MEGA-A








































































Результаты поиска

Содержание TF MEGA-A

Отзывы:

Hefter TF MEGA-A, Инструкция по эксплуатации, Страница: 13 / 71

Результаты поиска

Содержание TF MEGA-A

Отзывы: