14 / 68
CS
EN
SK
PL
HU
•
Do not put hands, other body parts and clothes in the filling chamber, near the discharge
channel or other moving parts.
•
In the event of blockage in receiving opening or discharge channel, turn off the engine and
disconnect the plug before removing the remains of material from the channel or opening.
•
Make sure that there are no accumulated debris and other substances on the engine to
protect it from damage or possible fire. Keep in mind that when switching on the motor-
powered machines all cutting implements start to operate as well.
ELECTRICAL SAFETY
Caution! Do not touch the damaged cable and pull the mains plug when the cable
is damaged while working. Damaged cables increase the risk of an electric shock.
If the power supply is damaged, it must be immediately replaced with a cable
without defect, to avoid dangerous situations.
•
Do not expose this machine to the rain not even do not use this machine in dampness and wet.
Keep good lighting on the work place.
•
Do not use the machine in place, where is the danger of fire or explosion.
•
Protect yourself against the electric shock.
•
Do not carry or manipulate the machine by the power cord, do not pull up the socket inlet
from the socket outlet by pulling the power cord. Protect the power cord against heat, grease,
aggressive liquids and sharp edges.
•
Pull up the socket inlet from the socket outlet before every adjustment, repair or maintenance.
•
Check the power cord regularly and check, if there are not marks of damage or ageing.
•
If the power cord is damaged, let it have changed in accredited service to prevent the danger.
•
Do not connect the damaged power cord into the supply and do not touch the damaged cable before
its disconnection of the supply. The damaged power cord could lead to the contact with lively parts.
•
Work only in such place, which you can reach safely. Allways keep stationary position and
balance.
•
Avoid unintentional startup. When carrying the machine, always unplug the mains plug. When
connecting plugs to the socket, make sure the switch is turned off.
•
When working outdoors, use only extension cords that are approved and correspondingly
marked for this application and with conductors of adequate cross section.
•
Check the damaged parts. Before the next using of the device it is necessary to survey the
damaged protection covers and other parts to judge, if the parts can continue to perform
their duty. Check adjustment of moving parts and their moveability, concentrate on cracks and
broken parts, fixation and other circumstances, which could threaten their duty. Protection
cover or another part, which is damaged, must be repaired or changed by accredited service.
Defective switch must be changed in accredited service.
•
Do not use this machine if it is impossible to turn it on/of by the switch.
•
Do not use this machine if the power cord is damaged or magged.
•
This electric device is constructed in accordance with all valid safety regulations, which relate to
it. All repairs must be made only by qualified persons and only original spare parts can be used.
It can come to serious danger for the user in another case.
•
Disconnect the supply (by pulling out the plug from the socket for example):
Allways, when the machine is without supervision
Before eliminating of blocking
Before checking, cleaning or work on the machine
After crash into another subject
Allways, when the machine beginns vibrate unreasonably
When transporting
Содержание 6285 Xl
Страница 9: ...9 68 CS EN SK PL HU 5 6 7 8 9 10 11 12...
