18 / 84
PL
SK
EN
CS
HU
OPERATION WITH THE MACHINE
OPERATION
• Before operation, check that the shredder adapter is correctly seated on the chassis and
the correct positioning of the debris bag and the safety switch (see no.16 in
fig. 1
).
Do not turn the machine on when the debris bag or the safety switch are not in
the correct position.
ON/OFF
CAUTION!
A
Filling funnel must be empty.
1. See fig 5.
Uncover security lid on the plug socket (7) and connect the extension cable.
2. Place the rotation direction switch (2) to “indraft“position.
3. To turn on press ON button (3).
4. To turn off press OFF button (4).
5. Crushing roller still rotates for few seconds when engine is switched off!
ROTATION DIRECTION ADJUSTMENT
Before changing the direction of rotation, always switch off the machine and wait until
the crushing roller stops completely.
“Indraft“ position
Place the rotation direction switch (see no. 2 in
fig. 1
) to “indraft“ position (continuous
operation): material is pulled in and shredded.
“Reverse“ position
Place the rotation direction switch (see no. 2 in
fig. 1
) to “reverse“ position (tap operation):
blocked shredded material will be released.
DEBRIS BAG DISCHARGE
Empty debris bag in time. Bare in mind that the debris bag under discharge channel is
filled unevenly!
1. Switch off the machine.
2. Unlock the debris bag with safety switch (see no.16 in fig 1) in „OFF“ position.
3. Pull debris bag out from the chassis and empty it.
4. Before sliding debris bag back onto the chassis, make sure that there are no wood chippings
around the safety switch.
5. Slide the debris bag onto the chassis and put the safety switch back to „ON“ position.
OVERLOAD PROTECTION
• The machine is equipped with a fuse that shuts down the machine when overloading
the engine (e.g. when the cylinder is blocked by too thick branches).
