background image

12 / 84

PL

SK

EN

CS

HU

TRAINING

 

C

All  operating  personnel  must  be  adequately  trained  in  the  use,  operation  and 
setting and especially familiar with prohibited activities.

•  Never allow use by children or people unfamiliar with these instructions. Local regulations 

may specify an age limit of the operator.

   CAUTION! 

A

This  product  is  not  intended  for  use  by  persons  with  reduced  sensory  or  mental 
capacity or lack of experience and knowledge - unless they are under the supervision 
of the person responsible for their safety or if this person has instructed how use this 
product. The product is not intended for use by children and persons with reduced 
mobility or poor physical disposition. We strongly recommend to pregnant women 
to contact her doctor before use of this product.

•  Respect  national/local  regulations  regarding  working  time  (please,  contact  your  local 

authority).

SAFETY INSTRUCTIONS

   WARNING! 

B

Failure to follow the warnings and instructions may result in electric shock, fire and/
or serious injury.

The  use  of  other  accessories  or  attachments  other  than  those  specified  in 
the instructions for use, can cause injury.

•  Get  to  know  this  product.  Carefully  read  the  instruction  manual.  Learn  how  to  use  this 

product, all restrictions, and what risks could related with its use. Learn the product quickly 
stop and turn off the controls.

•  Be careful at work, be concentrated on actual work, and use the common sense. 
•  If the product is not in use, it should be stored in a dry and secure place out of the reach of 

children.

•  Never pull the plug from the socket by pulling on the cord. Keep the supply cord away from 

heat, grease and sharp edges.

•  Disconnect the product from the power supply, if it is not in use, before start to repair and 

if you need replace the accessories.

•  Make sure when plugging into a socket that the switch is in “off” position.
•  If the product is used outside, use only extension cord designed for outdoor use and marked 

as such.

•  Pay attention to what you are doing, be concentrated and think sensibly, do not work with 

the product if you are tired, under the influence of alcohol, drugs or medication.

•  Faulty switches must be entrusted to an authorised repair service for replacement.
•  Do not use this product if the main switch does not allow it to switch on or off.

Содержание 6280 XL




























Отзывы: