22 / 84
PL
SK
EN
CS
HU
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
TROUBLESHOOTING
The engine isn‘t
running.
The collection box is poorly
connected.
Push the collection box in again and move
the safety switch lever to the "ON" position.
Main switch is in the wrong
position.
position Move the switch to the "inserting"
position or "reverse" position.
No voltage from the mains. Check the electrical outlet.
Damaged lead cable. Check or replace the cable.
Waste is not
drawn.
Material is too soft.
Move it with a tool or add dry branches.
Material is blocked.
Release jamming.
The waste is poorly
crushed.
Poorly adjusted pressure plate. Adjust the pressure plate as decribed in
the instructions.
Unusual vibrations,
noise.
Material is blocked. Release jamming.
Poorly adjusted pressure plate. Adjust the pressure plate as decribed in
the instructions.
Damaged crushing cylinder. Requires repair in an authorised service centre.
WARNING!
B
Defects that can not be repaired using this table, can only be corrected by an
authorized service center.
SERVICE AND SPARE PARTS
• Have your device serviced by a qualified repair personnel using only identical replacement
parts. This will ensure that the safety of the device is maintained.
• Whether you need technical advice, repair, or genuine factory replacement parts,
contact the HECHT authorized service nearest you. Information on service locations, visit
www.hecht.cz
• When ordering spare parts, please quote the part number, this can be found at
www.hecht.cz
DISPOSAL
• Dispose your device, accessories and packaging in accordance with the requirements of
environmental protection into the recycling collection center.
• This machine does not belong to the household waste. Save the environment and take this
device to designated collection points where it will be received for free. For more information
please contact your local authority or nearest collection point. Improper disposal may be
punished according to national regulations.
