Heatmor Response 200 SSRII, Инструкция по эксплуатации, техническому обслуживанию и мерам безопасности

Страница: 87 / 96

80
Someone has
accidentally opened
a valve and not told
anyone.
Add water.
Refer to
“Water Level Maintenance.”
Leaking water line. Fix leak in water line.
Contact your
Local Dealer .
Bladder is leaking. Replace bladder. Refer to “Bladder.”
Door hoses are leaking. Replace door hoses.
Refer to
“Firebox Door hoses and
elbows.”
Bladder gate valve needs
adjusting.
Adjust and tighten
gate valve.
Refer to
“Bladder Gate valve and
Bladder hose.”
Hose clamps are leaking. Tighten hose clamps. Contact your
Local Dealer.
smoke from
chimney is an
annoyance.
Chimney is not
high enough.
Add Chimney
Extension.
Refer to
“chimney extension(s).”
Improper location of
furnace (trees, buildings,
winds, neighbors).
Possibly relocate
furnace. Contact local
dealer.
Contact your
Local Dealer.
Built up creosote is
burning off firebox
surface. Wood pieces
are too small - too much
surface area.
Maintain hot fire. Refer to
“Wood.”
Draft blower has just
turned off.
Smoke will dissipate.
Burning garbage.
DO NOT BURN
GARBAGE.
Contact your
Local Dealer.
A.R.D. is not operating
properly.
Refer to
“anti-rollout Device.”
Wood stacked on top of
the air box
Re-stack wood off
airbox
Refer to
“Loading Wood into the
heatmor.”
PrOBLeM cause sOLutiOn PrOceDure