Heatmor Response 200 SSRII, Инструкция по эксплуатации, техническому обслуживанию и мерам безопасности

Страница: 81 / 96

74
Air trapped in water lines. Bleed lines.
Contact your
Local Dealer .
Malfunction of heating
appliances in building.
Repair, adjust or
replace.
Contact your
Local Dealer .
Furnace will not
burn properly
or will not
maintain water
temperature.
Chimney plugged. Clean Chimney.
Refer to
“chimney stub.”
Not enough wood in
Firebox.
Add wood.
Refer to
“Loading wood into the
heatMOr™.”
Poor quality wood. Better wood.
Refer to
“types of Wood.”
Draft flipper stuck.
Remove blower and
flipper assembly-clean,
lube or replace.
Refer to
“steps to Maintain your
Blower and Flipper assembly.”
Electrical power is off or
not constant.
Check all electrical
connections. Call
dealer or licensed
electrician.
Refer to
“electrical (contact Local
Dealer).”
Fire is out. Re-light fire.
Refer to
“Lighting Your heatMOr™.”
Flue plugged. Clean Flue.
Refer to
“top rectangular Flue.”
Blower fins are full of
dust.
Clean Blowers.
Refer to
“steps to Maintain your
Blower and Flipper assembly.”
Blowers not running
properly or up to speed.
Clean Blowers.
Refer to
“steps to Maintain your
Blower and Flipper assembly.”
Ashes in Air Box(s). Clean Air Box(s).
Refer to
air Box(s).
Too many ashes in
Firebox restricting air
flow.
Clean out ashes with
Auger.
Refer to
“ash Management and ash
removal.”
PrOBLeM cause sOLutiOn PrOceDure