Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. V • 3/13
39
LATCHES
(BOTH BOTTOM
AND TOP)
GLASS
ASSEMBLY
Placing the Ember Material
Ember material is shipped with this gas fireplace. The bag
labeled Glowing Ember (050-721) is standard glowing ember
material. To place the ember material:
• Remove latches and tension springs around the glass door.
• Remove the glass door from the unit (Figure 55).
• Place small pieces of ember material on burner top around
burner ports (Figure 56). Do NOT press embers into burner
ports. Cover the top of the burner with a single layer of ember
material. Do NOT place embers behind the rear port row as
noted in Figure 56.
• Save the remaining ember materials for use during fireplace
servicing.
• Replace the glass door and a front trim door on the unit (see Replacement Parts Section of the manual.)
• Replace the latches and tension springs.
Figure 56. Placement of the Ember Material
Figure 55. Glass Assembly
LOG #6 (SRV540-704):
Place log #6 against the second and third grate bars.
If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.
DO NOT PLACE EMBERS BEHIND THE REAR BURNER PORTS
6
6
