manualshive.com logo in svg

Heat & Glo SL-350TRS-C, Руководство пользователя

Владелец Heat & Glo SL-350TRS-C может легко скачать бесплатное руководство по эксплуатации на нашем сайте. Этот мануал предоставит всю необходимую информацию для настройки и использования продукта. Скачайте его сейчас на manualshive.com и наслаждайтесь вашим новым камином!

Поделиться
Скачать
background image

Heat & Glo •  SL-750TRS-IPI-D, SL-550TRS-IPI-D, SL-350TRS-C •  InD  •  2065-985  Rev. o • 3/07  

78

© 2005 Hearth & Home Technologies Inc.

LIMITED LIFETIME WARRANTY

Hearth & Home Technologies

D.   Limited Lifetime Warranty

BASIC ONE-YEAR WARRANTY.  HEARTH & HOME TECHNOLOGIES INC., located at 20802 Kensington Boulevard, Lakeville, MN 55044, war-
rants to the original owner that your new HEARTH & HOME TECHNOLOGIES Gas Appliance (the “Product”) will be free from defects in materials 
and workmanship for a period of one year from the date of installation.  During the 

¿

 rst year, HEARTH & HOME TECHNOLOGIES will replace 

or repair, at its discretion, any defective components at its sole cost and expense, including payment of all reasonable labor costs incurred in 
replacing or repairing such components. This basic warranty is subject to the conditions, exclusions and limitations described below.
EXTENDED LIFETIME COVERAGE.  HEARTH & HOME TECHNOLOGIES INC warrants that the 

¿

 rebox, heat exchanger, log(s), and burner 

will not be defective in material or workmanship during the period the Product is owned by the original owner, subject to the following conditions, 
exclusions and limitations described below.
CONDITIONS, EXCLUSIONS AND LIMITATIONS:
1.   This warranty applies to the original owner only and is nontransferable.
2.   This warranty applies only to Products installed in the United States of America or Canada.
3.   This warranty is limited to the replacement or repair of defective components or workmanship and HEARTH & HOME TECHNOLOGIES 

may fully discharge all obligations under this warranty by repairing or replacing, at its discretion, the defective components. The maximum 
amount recoverable under this warranty is limited to the purchase price of the Product and, if HEARTH & HOME TECHNOLOGIES  is un-
able to provide replacement or repair in an expedient and cost-effective manner, HEARTH & HOME TECHNOLOGIES may discharge all 
obligations under this warranty by refunding the purchase price of the Product.  IN NO EVENT SHALL HEAT & GLO BE LIABLE FOR ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY DEFECTS IN THE PRODUCT. 

4.   Any labor and related repair charges relating to the costs and expenses of replacing or repairing defective components under the Limited 

Lifetime Warranty are not covered by this warranty, except as provided for under the Basic One-Year Warranty.

5.   Components and parts made by other manufacturers, whether sold with the Product or added thereafter, are NOT covered by this warranty 

unless expressly authorized and approved by HEARTH & HOME TECHNOLOGIES  in writing.

6.  Any damages caused by environmental conditions, inadequate ventilation or drafting caused by tight sealing construction of the structure, 

air handling devices such as exhaust fans or forced air furnaces, or other such causes are not covered by this warranty.

7.   This warranty will be void if:
 

a)  The Product is not installed, operated and maintained in compliance with local building codes and with the instructions in the Installer’s 

Guide, Owner’s Guide and Listing Agent Identi

¿

 cation Label furnished with the Product. 

 

b)   Any parts or components made by other manufacturers are added or used in the Product, unless expressly authorized and approved 

by HEARTH & HOME TECHNOLOGIES INC in writing.

 

c)   Any service work is performed on the Product by anyone other than an authorized HEARTH & HOME TECHNOLOGIES representa-

tive.

 

d)   The Product is damaged due to shipping, improper handling, accident, abuse or misuse.

 

e)   Fuels other than those speci

¿

 ed in the Installer’s Guide and Owner’s Guide are used.

  f ) 

 

Modi

¿

 cation was made to the Product which was not expressly authorized and approved by HEARTH & HOME TECHNOLOGIES in writing.

EXCEPT TO THE EXTENT PROVIDED BY LAW, HEARTH & HOME TECHNOLOGIES INC MAKES NO EXPRESS WARRANTIES OTHER 
THAN THE WARRANTY SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE 
WARRANTY SPECIFIED ABOVE.  
Some states do not allow limitations on how long an implied warranty lasts, or do not allow exclusion or limitation of incidental or consequential 
damages, so those limitations may not apply to you. This warranty gives you speci

¿

 c legal rights, and you may also have other rights which vary 

from State to State.
If warranty service is needed you should contact your installing dealer and if the installing dealer is unable to provide necessary parts or compo-
nents, contact the nearest authorized HEARTH & HOME TECHNOLOGIES dealer or supplier.
NOTES TO CUSTOMER:

1.  In order to insure proper installation, operation and maintenance 

HEARTH & HOME TECHNOLOGIES INC

 strongly recom-

mends annual servicing by an authorized 

HEARTH & HOME TECHNOLOGIES

 dealer.

2.  Please complete this information and retain this warranty in a safe place for future reference: Installation Date:______
 

Model #:_________________   Serial #:______________  Installing Contractor:_________________________

3. 

HEARTH & HOME TECHNOLOGIES INC

 reserves the right to make changes at any time, without notice, in design, mate-

rial, speci

¿

 cations and prices of the Product. 

HEARTH & HOME TECHNOLOGIES 

also reserves the right to discontinue 

styles and products.

Содержание SL-350TRS-C








































































Отзывы:

Нет отзывов

Похожие инструкции для SL-350TRS-C

Pacific energy ESTEEM Installation And Operating Instructions Manual preview
ESTEEM
Бренд: Pacific energy Страницы: 37
Landmann Fraser Assembly And Use Instructions preview
Fraser
Бренд: Landmann Страницы: 6
Majestic fireplaces QUARTZ32IN Installation Manual preview
QUARTZ32IN
Бренд: Majestic fireplaces Страницы: 72
Martin BV4536 Installation And Operating Instructions Manual preview
BV4536
Бренд: Martin Страницы: 36
Majestic MBU36 Installation Manual preview
MBU36
Бренд: Majestic Страницы: 20
Lennox TRAD-FPK-BG-LG Installation Instructions preview
TRAD-FPK-BG-LG
Бренд: Lennox Страницы: 4
HPC MLFPK 18-SQ Installation & Operation Instructions preview
MLFPK 18-SQ
Бренд: HPC Страницы: 10
Superior Fireplaces WRT4826 Installation And Operation Instructions Manual preview
WRT4826
Бренд: Superior Fireplaces Страницы: 32
Blue Rhino WAD931M Owner'S Manual preview
WAD931M
Бренд: Blue Rhino Страницы: 8
CHAD-O-CHEF VFDG 700 Installation & Operating Instruction Manual preview
VFDG 700
Бренд: CHAD-O-CHEF Страницы: 12
UBERHAUS DESIGN WW11990 Operator'S Manual preview
WW11990
Бренд: UBERHAUS DESIGN Страницы: 9
Febo Flame 17IN-42-118 User Manual preview
17IN-42-118
Бренд: Febo Flame Страницы: 9
Febo Flame ZHS-32-F User Manual preview
ZHS-32-F
Бренд: Febo Flame Страницы: 10
Rasmussen Chillbuster 7 User Manual preview
Chillbuster 7
Бренд: Rasmussen Страницы: 19
Viessmann Vollmer 44113 Operation Manual preview
Vollmer 44113
Бренд: Viessmann Страницы: 4
GRAND EFFECTS 42" Legacy Operating And Maintenance Intructions preview
42" Legacy
Бренд: GRAND EFFECTS Страницы: 11
GTI 5000 TV Installation And Operation Instructions Manual preview
5000 TV
Бренд: GTI Страницы: 22
Blumfeldt 10030245 Manual preview
10030245
Бренд: Blumfeldt Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды