manualshive.com logo in svg

HBS 93-20-270, Руководство по эксплуатации, Страница: 7 / 66

Поделиться
Скачать
HBS 93-20-270 Скачать руководство пользователя страница 7

A 12 Order No. BA 93-20-270   Issue 01.03.08

7

1

General

Persons addressed by this operating manual

This operating manual is written for operators, personnel of the end user, and authorized

service technicians. It provides you with all necessary information to operate the welding

gun.

Required user qualification

The welding gun must only be operated by qualified personnel.

Let the welding gun only be operated by persons who
– are qualified through a suitable training according to the current standards for stud

welding (see appendix),

– are properly instructed,
– are physically and intellectually suitable,
– can be expected to reliably fulfill the requested job.

What else must the owner observe?

Make sure that this operating manual is always in reach of the stud welding unit.
Read the entire manual before operating the welding gun.
Strictly observe the safety instructions.
Before starting up the welding gun, let the operator sign the confirmation that he/

she has read and fully understood the operating manual (see appendix).
Do not commence stud welding until you have understood all operating

processes.

Contact us if there are any doubts on certain operating procedures.
Protect the welding gun against unauthorized use.

Inform our service in case of malfunction.

Based on this operating manual, a company specific work order, as well as a company

specific maintenance instruction must be drawn up. The company specific work order

must consider the special user conditions in your company.

Make sure that operators of the welder are provided with and wear personal protective

equipment, e.g. protective goggles, gloves, shoes, ear protection etc.

Owners and operators make sure that the welding gun is only used as directed.

During any activity such as transportation, set-up, (re-)assembly, production,

maintenance etc. observe the information given in this operating manual.

Содержание 93-20-270



































































Отзывы:

Нет отзывов