HBS 93-20-270 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 66

HBS 93-20-270 Скачать руководство пользователя страница 26

26

A 12 Order No. BA 93-20-270 Issue 01.03.08

5.2.1 Drawn-Arc Stud Welding with Ceramic Ferrule

Drawn-arc ﬆud welding with ceramic ferrule is used with welding elements of 3 to 25 mm

diameter (preferably above 12 mm diameter) and with welding times of 50 to 2000 ms.

It is generally suitable for all welding positions. When ﬆud welding with ceramic ferrule,

the welding position is PA (vertical). The major part of all applications applies to this

procedure.
The ceramic ferrule (CF)
– prevents atmosphere from getting to the weld pool by a formation of metal vapor in

the arc chamber

– ﬆabilizes and concentrates the arc, thus decreasing the arc blow eﬀect
– forms the melt under pressure to a weld collar and supports the weld pool on a vertical

wall and overhead

– protects the welder from arc radiation and welding spatters.

Normally, the ceramic ferrule is used for only one weld and is removed after solidiﬁcation

of the weld pool.
Standard welding elements and ceramic ferrules are described in several ﬆandards (see

appendix). When using concrete anchors or shear connectors the front area can be

plane conﬆructed with a small pressed-in aluminum ball.

Studs with cone-shaped front area and aluminum ball

are preferably used with

ceramic ferrule.

5.2.2 Drawn-Arc Stud Welding with Shielding Gas

Drawn-arc ﬆud welding with shielding gas is used with welding elements for a diameter

range of 3 to 12 (16) mm and with welding times from 50 to 2000 ms. Principally, it is

suitable for all welding positions, however, it is preferably used in vertical position PA.

With ﬆud welding with shielding gas, the weld area is protected by shielding gas. The

shielding gas, which is fed from outside through a gas control and an additional device,

displaces the ambient atmosphere from the welding area and reduces considerably pore

formation.

With ﬆeel and CrNi ﬆeel, the gas mixture 82% Ar and 18% CO

2

(DIN EN ISO 14175 – M21) is mainly used.

With aluminum, pure argon Ar 99,99 (DIN EN ISO 14175 – I1) or

Ar-He mixtures (DIN EN ISO 14175 – I3) are used.

«
...
24
25
26
27
28
...
»

Содержание 93-20-270



































































Отзывы:

Нет отзывов