HBS 93-20-270 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 66

HBS 93-20-270 Скачать руководство пользователя страница 23

A 12 Order No. BA 93-20-270 Issue 01.03.08

23

THREAT TO LIFE to persons ﬁtted with a pace maker

Strong electro-magnetic ﬁelds occur in the vicinity of the ﬆud welding

unit during welding. Such ﬁelds may aﬀect the proper function of a

pace maker. Thus persons equipped with a pace maker muﬆ not

operate the ﬆud welding unit and muﬆ not ﬆay in its vicinity during

welding.

During the actual welding process, you muﬆ expect red-hot welding

spatters, possibly liquid spatters, a ﬂash, and a loud bang > 90 dB (A).

Alert any colleagues who are occupied in the vicinity of the welder.

Wear your personal protective equipment according to actual

ﬆandards (see appendix).

MAGNETIC FIELDS!

During ﬆud welding, ﬆrong magnetic ﬁelds are present. Do not

weld in the vicinity of electrical syﬆems and machines which

could be aﬀected.

Warning: Unauthorized interference with the ﬆud welding unit

as well as unauthorized alteration of the ﬆud welding unit are

prohibited and result in complete cancellation of any guarantee

and liability claims againﬆ HBS.

In case of any accidents whatsoever, advise a physician, your supervisor, and

the oﬃcial bodies immediately.

«
...
21
22
23
24
25
...
»

Содержание 93-20-270



































































Отзывы:

Нет отзывов