manualshive.com logo in svg

HBS 93-20-270, Руководство по эксплуатации, Страница: 10 / 66

Поделиться
Скачать
HBS 93-20-270 Скачать руководство пользователя страница 10

10

A 12 Order No. BA 93-20-270   Issue 01.03.08

1.3

General Safety Instructions

Improper operation of the welding gun is LIFE-THREATENING!

Threat to life
– by electric shock and arc
– by toxic vapors and airborne particles
– by red-hot metal spatters (fire risk)
– by blow-up of explosive gases and materials
– by strong magnetic fields for persons fitted with a pace maker
In addition, through improper use damage to the stud welding unit

and to material can be caused. For details, see chapters 1, 3 and 5.

1.4

Intended Use

Warning: Unauthorized interference with the stud welding unit

as well as unauthorized alteration of the stud welding unit are

prohibited and result in complete cancellation of any guarantee

and liability claims against HBS.

Operation of the welding gun is only allowed with HBS power

units, this clause is also part of ”use as directed”.

The welding gun is intended to weld welding elements according to actual standards

(see chapter 5 and appendix). Any other use is regarded as not used as directed. The

manufacturer is not liable for damages resulting from the welding gun not used as

directed. Any risk is carried by the user.

The welding gun is designed according to specific standards and accident prevention

regulations. Basics are European Union guidelines and in Germany valid standards.

Please note that in your country additional standards and safety conditions (especially

rules for accident prevention) may differ from the standards mentioned in this operating

manual.

 The welding gun was manufactured to the latest developments in technology

and is regarded as safe to operate (place of operation see section 8.1).
The welding gun A 12 can be connected to the HBS power units ARC 500, ARC 800,

ARC 1550, IT 90, IT 130, IT 1001 and IT 2001. For details please contact the HBS

customer service (address see page ii).

Check in any case the operating manual of the HBS power unit whether this

welding gun can be used.

Observing the operating manual of the used power unit is also part of the ”use as

directed”.

Содержание 93-20-270



































































Отзывы:

Нет отзывов