HBM TEDS, Руководство по эксплуатации

Страница: 26 / 36

26
TEDS
A1813-1.1 en HBM
5.2 Example 2
Transducer produced by operator
•
HBM pressure transducer P3MB / 100bar, TEDS module installed by
operator
• Application with MGCplus, ML30B, AP01i
• Operation via AB22A display and control panel
1. Writing the TEDS memory content with the TEDS Editor
To make TEDS available, the transducer data must be written once to the
TEDS memory of the transducer. Changes are possible at a later date.
• MGC connected to PC (e.g. USB or Ethernet interface)
•
PC has the MGCplus Assistant software (included in the MGC scope of
delivery, also available as a download from www.hbm.com ). This example
is described using version 3.3.
•
The USB driver software is also available as a download from
www.hbm.com .
• The operator must log on as the administrator
(MGCplus Assistent- OPTIONS – User administration - TEDS)
Changing user administration
only becomes effective after
restarting the program.
NOTE