HBM TEDS, Руководство по эксплуатации

Страница: 11 / 36

11
TEDS
A1813-1.1 en HBM
• General:
Transducer circuit with bridge type and resistance, calibration data, channel
name (channel name is HBM specific)
• Characteristic curve:
Transducer characteristic curve, defined either via (a) zero values, nominal
value and sensitivity or via (b) two points
• Power supply:
Data regarding supply voltage or electrical supply
• Signal processing (HBM specific):
Data regarding high or low pass filtering, tare or zero value. This data is
optional, if no values are entered in TEDS, the respective settings of the
amplifier are retained when reading in the TEDS data.
• Units conversion (HBM specific):
Conversion from the physical units specified in the Standard IEEE 1541.4
to any units required
To create a completely new TEDS, the transducer type must first be
determined; this can be done with the simple function ”TEDS content new
(HBM transducer)” where the right type can simply be selected from a list of
HBM transducers. Generalized samples are also available for special
transducers.