DIS2116
20
HBM
A2540-1.1 en/de
Status line
The status line is divided into 6 horizontal segments. The following symbols or
texts are displayed, where applicable:
•
WR1 ... WR3:
Displays the currently valid weighing range.
WR is not shown with just one weighing range
•
GROSS, NET, NET PT Indicates whether a gross measured value, net
measured value or a net measured value where a
manual tare is calculated, will be displayed
•
>0<
Displayed when the measured value is 0
±
0.25d
(true
zero).
•
1,2
Displays the overshoot of the set limit value 1
and / or 2
•
OVFL
Overflow is displayed when at least one load cell
or the entire scale is loaded with more than 160 %
of its maximum capacity
•
x10
10-fold resolution switched on
Measurement display
•
The weight value is displayed with
±
7 digits with decimal point
•
The physical unit is displayed with max. 4 characters
Display illumination
The LCD backlighting is always on once the power is connected
Display contrast
The LCD display contrast can be set in the menu ”DISPLAY
→
CONTRAST”
in 21 stages from −10 to +10. The lowest contrast is −10 and the h10.
