HAZET-WERK 9234-010, Руководство по эксплуатации

Страница: 34 / 40

34
SAWING
Secure and fasten the workpiece to be sawn with suitable screw clamps or other suitable
fasteners and stops, on a stable and non-slip work surface. Never hold the workpiece with
your hand and / or against your body! There is a risk that you will not be able to control
the tool and of serious damage to health, which can result in serious injury or even death!
Place the saw blade lightly against the workpiece to be cut, switch on the saw motor and
let it reach maximum speed before applying pressure. Whenever possible, the saw shoe
must be held firmly against the material to be cut. This prevents the saw from jumping or
vibrating and minimises blade breakage. All cuts that exert pressure on the sheet, such as
angles or curved cuts, increase the potential for vibration, kickback and sheet breakage.
PIERCING - WOOD ONLY
The first step in piercing is to measure the area to be cut and clearly mark it with a pencil,
chalk or scriber. Use the appropriate blade for the application. The saw should be longer
than 89 mm (3 ½“) and project beyond the shoe and the
thickness of the workpiece during the cut. Insert the blade
into the blade clamp.
Next, tilt the saw backwards until the rear edge of the shoe
rests on the work surface and the blade releases the work
surface (position 1, Fig. M). Now switch on the motor and
let the HAZET cordless reciprocating saw reach maximum
speed. Hold the saw with both hands and start a slow,
deliberate upward movement with the saw handle, keep-
ing the bottom of the shoe firmly in contact with the work-
piece (Position 2, Fig. M). The saw blade starts advancing
into the material. Always make sure that the saw blade is
guided completely through the material before you con-
tinue with the piercing.
Position 2
Position 1
WARNING!
• Inspect the construction site for hidden gas and water pipes or electrical lines before
making blind or submerged cuts. Disregard can lead to explosions, damage to prop-
erty, electric shock and/or serious injury.
Fig. M
3
Design and function
^
hazet.com •
]
info@hazet.de
Electrical energy may cause serious injuries!
Always wear personal protective equipment!