HAZET-WERK 9234-010, Руководство по эксплуатации, Страница: 37 / 40

37
INSPECTING FOR DUST
• Dust can be removed with a soft cloth or a cloth moistened with soapy water.
• Do not use bleach, chlorine-based detergents, benzene or thinners, as these
may damage the plastic.
• Wash and dry plastic parts with a soft cloth moistened with soapy water.
SPARE PARTS
• Only use original spare parts from the manufacturer.
• Unsuitable or defective parts may cause damage,
malfunction or total failure of the machine.
• The use of non-approved spare parts will invalidate all warranty, service and liability
claims and all claims for damages against the manufacturer or its representatives, dis-
tributors and sales agents.
STORAGE
The tool must be stored under the following conditions:
• Store the tool in a dry and dust-free place.
• Do not expose the tool to liquids and/or aggressive substances.
• Do not store the tool outdoors.
• Keep the tool out of the reach of children.
• Storage temperature: -10°C to +40°C.
• Relative air humidity: max. 60%.
DISPOSAL
• Worn-out rechargeable batteries (Li-Ion) and electric devices must not be disposed of in
domestic waste, but at suitable collecting points.
• Electronic waste, electronic components, lubrication and other auxiliary materials must
be treated as hazardous waste and may only be disposed of by authorised specialists!
• Reducing environmental pollution and preserving the environment are the main focus
of our activities!
4
Maintenance and Cleaning
HAZET-WERK Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-400 •
^
hazet.de •
]
export@hazet.de
Electrical energy may cause serious injuries!
Always wear personal protective equipment!