87
Current Trigger-Port All the settings for the special applications will be
(10):
listed here. If you want to remove some Special
Application settings from the " Current Trigger-Port
Table", select the Special Application settings you want
to remove in the table and then click "Delete Selected".
If you want remove all Special Appliacation settings
from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
Delete
Please select a special application by clicking
Selected (11):
the ‘Select’ box of the mapping, then click ‘Delete
Selected’ button to remove the setting. If there’s no
setting here, this button will be grayed out.
Delete All (12):
Delete all settings existed in trigger port table.
Reset (13):
Unselect all settings.
Note: Only one LAN client can use a particular special application at a time.
After you finish with all settings, please click ‘Apply’ (14) button and the
following message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
Содержание HW2R1
Страница 1: ......
