Hawking HW2R1, Руководство пользователя

Страница: 78 / 134

70
function of this wireless Smart Repeater is properly set,
you’ll see ‘Configured’ message here. If wireless
security function has not been set, you’ll see ‘Not
configured’.
Self PIN code: This is the WPS PIN code of this
wireless Smart Repeater. This code is useful when you
need to build wireless connection by WPS with other
WPS-enabled wireless devices.
SSID: The SSID of the Smart Repeater will be
displayed here.
Authentication Mode: The wireless security
authentication mode of the Smart Repeater will be
displayed here. If you do not enable the security
function of the Smart Repeater before WPS is activated,
the Smart Repeater will automatically set the security to
WPA (AES) and generate a set passphrase key for a
WPS connection.
Passphrase Key: The wireless security key of the Smart
Repeater will be displayed here.
Config Mode (3) There are ‘Registrar’ and ‘Enrollee’ modes for the WPS
connection. When ‘Registrar’ is enabled, the wireless
clients will follow the Smart Repeater’s wireless settings
for WPS connection. When ‘Enrolle’ mode is enabled,
the Smart Repeater will follow the wireless settings of
wireless client for WPS connection.
Configure Click ‘Start PBC’ to start Push-Button style WPS
via Push Button (4) setup procedure. The Smart Repeater will wait for WPS
requests from wireless clients for 2 minutes. The
‘Wireless’ LED on the Smart Repeater will be on
steadily for 2 minutes while the Smart Repeater waits
for incoming WPS requests.