Hawking HW2R1 Скачать руководство пользователя страница 11

Страница: 11 / 134

1-2 Safety Information

In order to keep the safety of users and your properties, please follow the

following safety instructions:

1. This Smart Repeater is designed for indoor use only; DO NOT place this

Smart Repeater outdoors

2. DO NOT put this Smart Repeater at or near hot or humid places, like

kitchens or bathrooms. Also, do not leave this Smart Repeater in the car in

summer.

3. DO NOT pull any connected cable with force; disconnect them from the

Smart Repeater first.

4. If you want to place this Smart Repeater in a high location or hang on the

Smart Repeater on a wall, please make sure the Smart Repeater is firmly

secured. Falling from high places will damage the Smart Repeater and its

accessories, and the warranty will be void.

5. Accessories of this Smart Repeater, like antennas and power supply, are a

danger to small children under 3 years old. They may put the small parts in

their nose or mouth and it could cause serious damage to them. KEEP THIS

SMART REPEATER OUT OF THE REACH OF CHILDREN!

6. The Smart Repeater will become hot when being used for extended periods

of time (

This is normal and is not a malfunction).

DO NOT put this Smart

Repeater on paper, cloth, or other flammable materials.

7. There are no user-serviceable parts inside the Smart Repeater. If you have

found that the Smart Repeater is not working properly, please contact technical

support or your dealer of purchase and ask for help. DO NOT disassemble the

Smart Repeater, or warranty will be void.

8. If the Smart Repeater falls into water when it’s powered on, DO NOT use

your hand to pick it up. Switch the electrical power off before you do anything,

or contact an experienced technician for help.

Содержание HW2R1







































































































































Результаты поиска

Содержание HW2R1

Отзывы:

Похожие инструкции для HW2R1

Бренды по названию

Популярные бренды

Hawking HW2R1, Руководство пользователя

Результаты поиска

Содержание HW2R1

Отзывы:

Похожие инструкции для HW2R1

Бренды по названию

Популярные бренды