49
2-6-1 LAN IP section:
Here are descriptions of every setup item:
IP address (1):
Please input the IP address of this Smart Repeater.
This is the IP address used to access your Smart
Repeater. Make sure to make note of the new IP
Address after you change it since the old one will no
longer work.
Subnet Mask (2):
Please input subnet mask for this network.
802.1d
If you wish to activate 802.1d spanning tree
Spanning Tree (3):
function, select ‘Enabled’ for setup item ‘802.1d
Spanning Tree’, or set it to ‘Disabled’
DHCP Server (4):
If you want to activate DHCP server function of this
Smart Repeater, select ‘Enabled’, or set it to ‘Disabled’.
If you select Disable, the IP settings from your source
Internet network will be passed through to clients
connecting through the Smart Repeater. (For example,
a network with a DHCP server IP range of 10.1.1.1 –
10.1.1.100 will disperse IP addresses within that range
to computers connecting through your Smart Repeater
while the Smart Repeater is connected to that specific
network)
1
3
2
4
Recommended Value if you don’t know what to fill:
IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
Содержание HW2R1
Страница 1: ......
