29
When you finish with all settings, click ‘Apply’, and you’ll see the following
message displayed on web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
NOTE: When you want to manage this Smart Repeater from another computer over
the internet, you have to input the IP address and port number of this Smart
Repeater. If your Internet service provider assigns you with a static IP address, it
will not be a problem; but if the IP address your service provider assigns to you will
vary every time you establish an Internet connection, this will be a problem.
Please either ask your service provider to give you a static IP address, or use
dynamic IP to host name mapping services like DDNS. Please refer to chapter 2-5-8
‘DDNS client’ for details.
NOTE: Default port number the web browser will use is ‘80’. If the ‘Port’ setting in
this page is not ‘80’, you have to assign the port number in the address bar of web
browser manually. For example, if the IP address of this Smart Repeater is 1.2.3.4,
and the port number you set is 8888, you have to input following address in the
address bar of web browser:
http://1.2.3.4:8888
Содержание HW2R1
Страница 1: ......