39
Connect On-Demand – Only connect when you want to
surf the Internet. “Idle Time Out” is set to stop the
connection when the network traffic is not sending or
receiving after an idle time.
Manual – After you have selected this option, you will see
the “Connect” button and “Disconnect” button, click
“’Connect” and the Smart Repeater will connect to the ISP.
If you want to stop the connection, please click
“Disconnect” button.
Idle Time Out (6):
If you have selected the connection type to
“Connect-On-Demand”, please input the idle time out.
After you finish with all settings, please click ‘Apply’ (7) button and the following
message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
2-5-6 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address)
and PPTP setting (PPTP user name and password). Here we start from WAN
interface setting:
Содержание HW2R1
Страница 1: ......