Hawking HPOW5CM, Руководство пользователя

Страница: 87 / 129

86
Tx/Rx Stream: 2 is the default setting. Using 1 will halve your speed.
Channel Bandwidth: The "20/40” MHz option is usually best. The other option is available for special
circumstances.
Extension Channel: Only for Channel Bandwidth “40” MHz. Select the desired channel bonding for
control. Upper supports 1-7 and lower supports 5-11
MCS: This parameter represents transmission rate. By default (Auto) the fastest
possible transmission rate will be selected. You have the option of selecting the
speed if necessary.
Shout GI: Short Guard Interval, by default, it's “Enabled” so throughput can be increased.
However, it can also increase error rate in some installations, due to increased
sensitivity to radio-frequency reflections. Select the option that works best for
your installation.
Aggregation: By default, it's “Enable”. It allows sending multiple frames per single access to
the medium by combining frames together into one larger frame. It creates the
larger frame by combining smaller frames with the same physical source and
destination end points and traffic class (i.e. QoS) into one large frame with a
common MAC header.
Aggregation Frames: The Aggregation Frames is in the range of 2~64, default is 32. It determines the
number of frames combined on the new larger frame.