44
Click Finish and the device will automatically restart and save your settings. After you have finished, this
device will act as a Wireless Internet Service Provider. The device just needs be powered on via the P-
Data Out port on the PoE adapter and can be standalone (you can also connect any wired clients to the
10/100 Data in Port on LAN2). Please change your computer IP address back to “Obtain an IP
automatically.
3-5 Router Mode
When Router mode is chosen, the system can be configured as a Wireless Router. In this mode, the
device is supposed to be connected to internet via ADSL/Cable Modem. The NAT is enabled and PCs in
LAN/WLAN port share the same IP to ISP through the WAN port. The connection type can be setup in
WAN page by using static IP, Dynamic IP, PPPoE or PPTP client. This section provides a detailed
explanation for users on how to configure Router AP mode.
Log into the settings page, go to system and select “Mode Setup”
Содержание HPOW5CM
Страница 21: ...20...
Страница 50: ...49 Settings can be modified via the VLAN setup after configuration is complete See section 4 3...
Страница 126: ...125...