Hawking HPOW5CM, Руководство пользователя

Страница: 104 / 129

103
Total of 20 rules maximum allowed in the IP Filter List. All rules can be edited or removed from the List.
When you create rules in the IP Filter List, the prior rules maintain higher priority. To allow limited
access from a subnet to a destination network manager needs to create allow rules first and followed by
deny rules.
6-3 MAC Filter
Allows users to create MAC filter rules to allow or deny unicast or multicast packets from limited
number of MAC addresses. That MAC filter rules have precedence over IP Filter rules. (This feature is
only available in Router and WISP Modes)
MAC Filter Mode: Disable is the default setting. Options are Disabled, Only Deny List MAC or Only
Allow List MAC.
Only Allow List MAC: The wireless clients in the MAC Filter List will be allowed to
access to Access Point; All others will be denied.
Only Deny List MAC The wireless clients in the MAC Filter List will be denied to
access to Access Point; All others will be allowed.
MAC Address: Enter MAC address (e.g. aa:bb:cc:dd:ee:ff) and click “Add”. The MAC address
should display in the MAC Filter List. There are a maximum of 20 clients allowed
in this MAC Filter List. The MAC addresses of the wireless clients can be added
and removed to the list using the Add and Delete buttons.
Policy: Can choose to use rule by “Time Policy”
6-4 Virtual Server
This function allows you to redirect a port on Internet IP address (on WAN port) to a specified port of an
IP address on local network, so you can setup an Internet service on the computer on local network,
without exposing it on Internet directly. It is also referred to as “Port Forwarding”. You can also build
many sets of port redirection, to provide many different Internet services on different local computers
via a single Internet IP address.
(This feature is only available in Router and WISP Modes)