102
Policy:
Deny to drop and Pass to allow per filter rules
In/Out:
Applies to Ingress or egress packets.
Protocol:
Supports TCP, UDP or ICMP.
Source Address/Mask:
Enter desired source IP address and netmask. i.e. 192.168.2.10/32.
Source Port:
Enter a port or a range of ports as start:end. i.e. port 20:80
Destination Address/Mask:
Enter desired destination IP address and netmask. i.e. 192.168.1.10/32
Destination Port:
Enter a port or a range of ports as start:end. i.e. port 20:80
Listen:
Click Yes radial button to match TCP packets only with the SYN flag.
Interface:
The interface that a filter rule applies
Schedule:
Can choose to use rule by “Time Policy”
All packets are allowed by default. Deny rules could be added to the filter list to filter out unwanted
packets and leave remaining allowed.
Содержание HPOW5CM
Страница 21: ...20...
Страница 50: ...49 Settings can be modified via the VLAN setup after configuration is complete See section 4 3...
Страница 126: ...125...
