Hawking HPOW5CM, Руководство пользователя

Страница: 38 / 129

37
This allows you to create a repeater AP and set SSID to your wireless network. Enable this if you want
the device to act as a wireless repeater. If your choose disable, the device will be configured ONLY as a
client bridge. If you click enable, you can set the settings for the repeater.
This page is used to define the parameters for the wireless LAN clients
ESSID: This is the wireless broadcast name in repeater mode. By default, it is ‘Default’
but you can change it to whatever you want.
Authentication: Choose your type of security (Hawking recommends AUTO (WPA or WPA-2PSK))
3-3-3-1 Authentication (Wireless Security)
This section allows you to set up wireless security to prevent any unauthorized access to your wireless
network

Open System (security disabled)
When you select this mode, data encryption is disabled, and every wireless device in proximity will
be able to connect your wireless access point if no other security measure is enabled
Use this option only when you want to allow any user to use your wireless access point, and you
are not concerned about unauthorized access to your files and/or transfers over your network.

Wi-Fi Protected Access (WPA-PSK or WPA2-PSK):
When you select this mode, the wireless access point will use WPA encryption, and the following
setup menu will be shown on your web browser: