Haulotte HA20RTJ O, Руководство оператора

Страница: 67 / 112

A
B
C
D
E
F
G
H
I
67 4000388880 E 06 15 GB / USA
D
- Operation instructions
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
1.3 - O
PERATION FROM THE PLATFORM CONTROL BOX
• The platform control box is energized only when :
• The E-stop buttons on both ground and platform control boxes are not pressed in.
• Machine is switched on by turning ON/OFF selector key switch ( 18 ) at the ground
control box to ON position.
• Platform control box is energized by turning the control box energizing selector
switch ( 229 ) at the ground control box to the left.
• Overriding system not activated.
• A faulty joystick is not taken into account to control a movement. If this fault disappears, the
movement is authorised again.
• An E-Stop button at each control box stops all movements when pressed in; including
shutting off an engine (if equipped).
N.B.-:-DO NOT
TURN OFF THE POWER SUPPLY OF THE MACHINE USING THE
E-
STOP BUTTON
(U
SE
ONLY
IN CASE OF EMERGENCY
). T
URN OFF THE POWER SUPPLY OF THE MACHINE USING THE
CONTROL
ON/OFF ( 18 )
FROM THE GROUND CONTROL BOX
.
• A foot pedal switch is present that should be activated and maintained to authorize one or
more movements. If foot pedal switch is kept engaged without selecting a function movement
for more than 8 s; foot pedal switch is automatically de-acticvated.
• The release of foot pedal switch while performing a movement, stops that function
movement and all other movements are inactive. The stop of movements is progressive. If
the "Enable switch" is pressed again quickly within 0,5 s the movement restarts. If the
"Enable switch" is not pressed again quickly enough within + 0,5 s the movement will not
restart. It could restart only when the selected function switch/joystick is released to neutral
position.
• All switches and joystick operating a movement, return automatically to neutral when
released.
• At power up, a switch in it's neutral position will be taken into account to authorize movement.
For the US destined machines :
• The fuel selection (petrol or liquid propane gas) is done by turning the switch ( 44 ) to the
desired position.
• The status of the switches is tested automatically when the machine is switched on and
checked at every starting. A switch will be activated only after it has been detected in neutral
position.
• A buzzer beeps in the following conditions :
• When power is switched on.
• When platform is overloaded (if fitted).
• When machine is on a slope greater than the rated slope.
• Emergency pump. ( Section D 4.1 In case of engine power failure)
• Indicators - All indicators (LEDs 101 - 117) are checked when the machine is powered on
1.4 - O
PERATION OF OVERRIDING SYSTEM FROM GROUND CONTROL BOX
Please refer to paragraph D.4.2 To rescue operator from platform.