Haulotte HA20RTJ O, Руководство оператора

Страница: 17 / 112

A
B
C
D
E
F
G
H
I
17 4000388880 E 06 15 GB / USA
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
A
- Foreword
2.1.6 - Crushing / Collision Hazards
• Always cordon off the area around the base of the machine to keep personnel and other
equipment away from the machine while in use.
• Warn personnel not to work, stand, or walk under a raised boom/platform.
• Do not drive in reverse direction (opposite the field of vision).
• Be aware of the boom position and tail swing when rotating the turret (turntable).
• Always ensure that the chassis is never driven any closer than 1 m (3 ft 3 in) to holes,
bumps, slopes, obstructions, debris and ground coverings that may hide holes and other
dangers.
• Keep non-operating personnel at least 5 m (16 ft 5 in) away from the machine when driving
and slewing.
• Be aware of driving direction.
• When turret is slewed/rotated 180°, the platform is now facing the rear of the machine.
• Check the driving direction with the help of the red or green arrow on the chassis relative
to the red and green arrows on the platform control box.
• Also note that when changing the driving direction (Forward <> Reverse) the joysticks or
switches must return to the neutral position before reversing the drive direction and for
movement to occur.
• When driving, position the platform so as to provide the best possible visibility and to avoid
any blind spots.
• Hold on securely to the guardrails.
• Occupants must wear a harness in accordance with governmental regulations.
• Lanyard must be attached to the designated anchorage point.
• Avoid contact with fixed or mobile obstacles (other machines).
• Other machines (crane, aerial work platform, etc.) operating in the work area increase the
risk of crushing or collision. Restrict the operation of machines moving within the aerial work
platform work area.
• Take into consideration the stopping distance, reduced visibility and blind spots of the
machine.
• Limit travel speed to suit the ground surface condition, slope (incline), and people in the
vicinity.
When in the platform :
• Check the work area for overhead clearance, for any obstacles besides
and below the platform when raising/lowering the platform and or before
driving.
• During movement, keep all the parts of the body inside the platform.
• To position machine close to a building/structure, it is recommended
using the upper boom and or arms movement control functions to
position, rather than driving machine closer to structure.